• Skip to main content
  • Skip to header right navigation
  • Skip to site footer
Systems Engineering & Management Company (SEMCO)

Systems Engineering & Management Company (SEMCO)

RF and state-of-the-art FPGA-based Digital Products7

  • Home
  • Telemetry Products
    • Telemetry Receivers
    • Telemetry Tracking Receivers
    • Telemetry Signal Simulators
    • RF Multi-Couplers
    • Turn-Key Mobile Telemetry Systems
    • RF Up/Down Converters
    • Software-Defined Receiver
    • Telemetry Repeaters
    • Telemetry Re-Radiation Systems
    • Pedestal-Mounted RF Channel Selectors
    • Automated Telemetry Test Systems
    • Airborne Digital Transmitters
    • Custom Antennas
  • About SEMCO
  • News & Announcements
  • Contacts
    • Technical Support
    • Sales Terms & Warranties

RF Multi-Couplers

SEMCO’s 1U rack-mount RF Multi-Couplers are designed for use with antennas that employ both dual and tri-band feeds (P, L, S and C-Band). These Multi-Couplers provide for single and dual 200 MHz to 5250 MHz RF inputs and provide either 4 or 8 RF outputs. These Multi-Couplers exhibit excellent channel isolation that is typically greater than 70 dBm and linearity across each selected frequency band of +/- 1 dBm. Each output channel has independent front panel and remote gain controls and frequency band selection. Multiple Multi-Coupler units can be remotely configured and controlled with SEMCO’s MCCS Network software program.

MC108-2 RF Multi-Coupler

The MC100 Series Multi-Coupler is a 1U Rack-Mount device that provides RF distribution form 200 MHz to 5250 MHz. Both single and dual output configurations are available, as well as up to 8 output channels. Each output is an independent channel with +/- 5 dB gain controls, providing the ability to balance all outputs within …

Read moreMC108-2 RF Multi-Coupler

MC110 RF Multi-Coupler

The MC110 Series RF Multi-Coupler provides the frequency range and versatility for managing the RF input signals of any telemetry ground station…at a very affordable price. Setup consists of connecting the I/O and setting up desired output port gain. Signal integrity is maintained through > 60 dB port isolation, as well as an overall noise …

Read moreMC110 RF Multi-Coupler

Corporate Headquarters

Systems Engineering & Management Company (SEMCO)
1430 Vantage Court
Vista, CA 92081

Customer Service

800-995-0636, ext. 1100
760-727-7800, ext. 1100
760-727-5200 Fax
info@semco.com

Navigation

Telemetry Products

About SEMCO

Technical Support

Contacts

Copyright © 2023 · Sytems Engineering & Management Company (SEMCO) · All Rights Reserved